Icom 7300 N1MM Logger Plus Setup

K0PIR

I'm an Amateur Radio enthusiast. I love the hobby and experimenting with radios, antennas and software. On my YouTube channel I upload videos on the Icom 7300 and Icom 7610 along with Ham radio software programs. I hope to inspire people to try new things in Amateur Radio.

Subscribe
Notify of
Call
25 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
Guest
ALAIN PUILLANDRE
7 years ago

Hello Richard
may be you can help me
i see several of your videos about ic7300
i am using on 1er computer (windows XP)DX4WIN+MTTY and MMTTY+N1MM WITH MY IC756PRO3
i had no problem with MMTTY + DX4WIN or mmtty+N1MM on FSK mode
I have the 2sd PC with WIN7 PRO
like you i am using two port one for CI-V and other for rx tx cw
with my trx IC7300 i am enable to made FSK
i read several of your video but no fsk here
when i use MMTTY only is ok on fsk mode
but when i am using it with DX4WIN or N1MM on RTTY MODE FSK have only a tune
Tnx for reading my message
maybe see you next week end on WAERTTY contest (my favorite mode after 6m band)
73 de alain F6HRP/TM22P

Guest
Jasper Jansen
7 years ago

Do I understand that if you want to do CW keying with n1mm logger you need the CI-V cable? Or is the CI-V cable Just for cat control or the USB cable for CW keying?

Guest
Lemuel Skidmore
2 years ago
Reply to  K0PIR

Rich, I found the same thing with the cable in the link you provided. I bought an FTDI version and it’s fine. I’ve been through a lot of discussion on the N1MM group on groups.io–the consensus–or at least loudest–opinion seems to be that the CI-V cable is superfluous at best. I have CW working withou it (just the USB cable).

What is your rationale for the 2-cable setup?

73, Lem W1LEM

Callsign
W1LEM
Guest
rik
6 years ago

Hi Richard Ive followed your directions to get N1MM up and running unfortunately when in cw mode my radio puts a continuous cw signal that cannot be switched out from the radio controls any suggestions would be appreciated.
Many thanks for all your posts they very useful especially for new IC7300 owners
Rik

Guest
Les
6 years ago

Is it possible to use the spectrum scope in n1mm, using a usb cable and ci-v cable on a IC-7300 in rtty mode?

If so, how do you setup everything? I’ve saw several youtube videos on the IC-7300 and n1mm but nothing on the above question.

Thanks,

Guest
John KE0YI
6 years ago

I’m curious about the details of how you have the CI-V cable connected between the IC-7300 and your computer. Are you connecting the IC-7300 remote jack directly to a USB port on your computer, or are you using an interface device such as the Icom CT-17?

I was able to get MMTTY working using FSK, but am now working on getting N1MM Logger+ working as well.

Thank you!

Guest
John KE0YI
6 years ago

I will definitely give the VSPE software a try. I also have a second monitor that could be hooked up just to show the N1MM spectrum display.

Thanks again!

Guest
John KE0YI
6 years ago

Got VSPE installed and have N1MM Logger+ working with MMTTY now with the full screen spectrum display. Will try to find some time to make a few contacts later this week.

Thanks!

Guest
Andrew Obrien
5 years ago

How do you “pair” a virtual port with the physical port that is installed by Icom drivers My software is VSPM, it is easy to create virtual ports and pair them but , for example, if the Icom 7610 or 7300 is on Com Port 6 and you want a SECOND application to share frequency read out, how do you do this? Example Commander and CW Skimmer (Omni Rig) both communicating frequency info to/from the ICOM ?
Andy K3UK

Guest
AL
5 years ago

Can I use this logging software “together” with my Icom RSBA1 software?

Guest
Udo
4 years ago

Hallo Rich ,
ich habe den IC7300 und N1MM Logger in Betrieb . Dazu ist ddie USB Schnittstelle mit wsjT-X beschalten . Die QRG wird über die Remote Schnittstelle übertragen . Hier ist auch FSK CW installiert .
Nun möchte ich aber die QRG auch noch in meiner PA Auswerten für die Bandumschaltung .
Dazu brauch ich aber eine CI-V Schnittstelle ..
Hier liegt aber mein Problem … Eine weitere VI-V Schnittstelle ! ???
73 es 55 de dl1pi

Guest
Steve Cox
3 years ago

Allow me to help with Udo’s post – It reads:
Hi rich
I have the IC7300 and N1MM logger in operation. For this purpose, the USB interface is wired with wsjT-X. The QRG is transmitted via the remote interface. FSK CW is also installed here.
Now I would also like to use the QRG in my PA for band switching.
For this I need a CI-V interface ..
But here is my problem … Another VI-V interface! ???

Guest
Robin
1 year ago

Hello Richard,

Trying to connect the Icom-7300 to the laptop via the USB-port, only. Message; “Radio #1, IC-7000 on COM 3 is nor responding.” Com 3 is the only port showing in the N1MM logger+.

Is there a detailed instruction available for using the USB-port?

Tx & 73s

Callsign
LB8CA
Guest
Greg Marino
9 months ago

Hey Mr Rich! Just set up my 7300 for keyboard keying for CW. Thanks to your easy steps…I FINALLY got it to work! Two questions though….

Is it possible to start sending CW, via keyboard, without first using the key strokes “ctrl-k?”

Also, when I’m through sending, have the radio return to receive without hitting “esc?”

I just retired and coming out of the dark ages so, all this is exciting for me…yet strange!

73 sir!
Greg NU4R

Callsign
NU4R
Translate »
25
0
Would love your thoughts, please comment.x
()
x