New HF Transceivers by Yaesu and Kenwood – 2018 Hamvention Videos
The 2018 Hamvention was better organized this year and traffic seemed to flow smoother. Even though it rained on and off, the rain showers were not hard and the flea market area was much better then last year. The walkways inside the track were lined with asphalt grindings which made it better when it rained.
There were more golf carts to shuttle people back and forth to the main parking lot and the shuttle buses going from remote parking to the fairgrounds improved. There was a minor glitch again this year with rain. The tractors hauling people from the bus stop got bogged down in mud. They promptly moved the bus stop location to a another spot and things were rolling smoothly once again.
Lots of Hams commented they were very pleased with the improvements. With the addition of a new building for next year; the Hamvention site at the Greene County Fairgrounds will be even better.
New HF Transceivers - Yaesu FTDX 101D
The release date and price on this radio is unknown. We couldn't find out much about this one. Here's what I do know and see the video below for a closeup.
The FTDX-101D rear connections are: Ant 1 and Ant 2, Ant 3/Rx, CAT, USB, Meter jack, Ext speaker: A and B, AF-out, REM, Rtty / Data, Linear, Key, Ext ALC, RX out A / Rx out B and GND.
Features mentioned in advertisements:
- SDR Technology and Waterfall Display
- Large Touch Panel precision color display
- Active Band Monitor enables rapid band changes with LED illumination of the operating band
- Independent control of the Main and Sub Bands allows effortless operation for the serious contester needing to move quickly between the amateur bands
- High-Q VC Tuning Front-End
- Main tuning dial for Main and Sub Band frequency control includes an Outer Dial for clarifier, VC tuning, fine tuning or custom settings.
New Yaesu FTDX 101D Video
New HF Transceivers - Kenwood TS-890S
The release date will be late summer and the price is unknown. We couldn't find out much about this one either.
Users will be able to hook up a panadapter. The Kenwood TS-890S will be similar to the TS 590SG and a separate SDR receiver can be used as a panadapter. (That option will be available with the Yaesu FTDX 101D above too.)
Features from the ads:
- Full Down Conversion RX
- H-mode Mixer
- High C/N 1st LO
- Built-in Roofing Filters 500Hz / 2.7kHz / 6kHz / 15kHz (270Hz Optional)
- 7 Inch Color TFT Display
- Roofing Frequency Sampling Band Scope
- Auto Scroll Mode
- Multi Information System
New Kenwood TS-890S Video
Toshio Torii, Kenwood's chief engineer for development of TS480,TS2000,TS590,TS890,TS990. Thank you Mr. Torii for your time and presence at the 2018 Hamvention.
I have more photos and videos of the Hamvention coming soon. If you haven't already, please subscribe to my YouTube channel. Videos will appear there before appearing on this website.
I am also on Instagram and you can follow me there. I posted video clips and photos of the Hamvention trip. I'll continue to update it when I travel.
As always, thank you for stopping by and if you have any questions, please comment below. I'll do my best to answer them in a timely manner.
Best 73 - Rich, K0PIR
Hi Rich:
I was a little surprised that Kenwood especially, but Yaesu did not show or mention anything about external monitor(s). The DVD-D connector (how old school) is there on both.
My guess is that they haven’t developed the video card hardware (maybe they both ought to give Icom a call 🤓) and/or the drivers.
One can assume that DVI (why use the odd -D connector?) and HDMI requires a license fee which they should pay and add to the price.
We will see.
Hi Garry,
Nice to hear from you and I too was surprised by the DVI on the rear. The Icom 7610 has DVI also.
I think (have been told) it is the licensing that is the deterrent of the HDMI.
DVI would be FB in my opinion if they would use a resolution of 1920 x 1200.
73,
Rich, K0PIR
Tnx info HA6ZB.
Thanks for commenting. It was a fun time at the Hamvention.
Best 73,
Rich, K0PIR
Hi Rich, do you have the LG 32MA70HY-P 32-Inch Monitor and does it work with the HP 8300 Elite? I was thinking you did a video on the monitor but can’t fine it. Thanks Art (KB7FXJ)
Hi Arthur,
Nice to hear from you and yes I do have the LG 32MA70HY-P 32-Inch monitor. It works great with my HP desktop 8300 Elite SFF. I am using the diaplay port on it. No issues at all.
Thank you and best 73,
Rich, K0PIR
“Serious’ contesters don’t need an LED to tell us what band we’re operating. We control the frequency with N1MM+ and don’t need to look at the radio. We make band changes by typing the desired frequency and mode in the Entry Window.
73, Bill, K8TE
Hi Bill,
N1MM is my favorite and I’ve learned to do just that. Use the entry window.
Best 73,
Rich, K0PIR
Huh… I was expecting an announcement for an upgraded version of the TS-2000(X), like what they did the the TH-F6A HT with the new TH-D74. With the TS-2000 being sooooooooo popular, (Look at the eham TS-2000 reviews, the largest there at well over 500. Not to mention the many at the TS-2000 Yahoo Group.), looks like Kenwood wants to keep that TS-2000, B-2000 TS-2000X, gravy train running for a bit longer. Me? If they ever do upgrade a new version of the TS-2000, will they include 222MHz, 902MHz, and 1296MHz, standard? (Ha-ha… Well, I can dream, can’t I?) I do have to say, that new Icom IC-9700 VHF / UHF rig looks sweet, but again, no 222MHz. Of course…. Common! They give the Euros 70MHz, so how much harder is it to throw in 222MHz? They almost did it with the TH-F6A HT. It RX’s 222MHz all-mode, but just TX’s FM. 73!!!!!