Icom 7300 WSJT-X Using DXLab Suite Commander, JT Bridge And RUMLogNG

K0PIR

I'm an Amateur Radio enthusiast. I love the hobby and experimenting with radios, antennas and software. On my YouTube channel I upload videos on the Icom 7300 and Icom 7610 along with Ham radio software programs. I hope to inspire people to try new things in Amateur Radio.

Subscribe
Notify of
Call
11 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
Guest
ghassan chammas
6 years ago

I am unable to make wsjt-x “talk” to my icom 7300. i have the full dxlab suite perfectly working, and i thought i would add the thrill of jt, but to no prevail.
i have only a windows 7 dual screen pc. and i wish i could make it hand shake with the rig and the wsjt-x.
i also was unable to make the radio ic7300 drive the icom ic2kl and its tuner automatically. i made the connection through the 13 pin connector as shown in the manual but the volatge levels to choose the frequencies are confusing the amplifier. any ideas?
many thanks
OD5YA

Guest
Nathan Brazil
6 years ago

Hello,
I was wondering if you have posted your exact settings anywhere? Saying it was tricky without saying how you solved it is unkind.

73,
NB

Guest
Bernard, G8KVM
6 years ago

Hi Rich. Many, many thanks for this and all your instructional videos. I have spent several months trying to get WSJT-X, JT-Bridge and Rumlog working together. Following the instructions in your video my set up now works great!

You’re a generous man Rich. I genuinely appreciate the time effort you put into creating this blog. Cheers.

Guest
Bernard, G8KVM
6 years ago

Hi Rich
I have just watched your RumLog/WSJT-X integration video on YouTube. I have everything working perfectly but do miss the extra information that JT Bridge gives e.g. LoTW and eQSL status of potential contacts. Do you miss this information or is it available elsewhere? Thanks.

Guest
Bernard, G8KVM
6 years ago

Hi Rich
That’s great. It’s interesting to compare notes especially as there is so much to think about in these ‘digital’ days! Thanks again for the really useful videos.

Hope we can make contact on the air sometime soon. Best 73. Bernard.

Guest
Eric
4 years ago

Hey, Rich! I recently had to reset my computer and lost all my settings. I got mostly everything working but have one issue.

When I use JT Bridge, it takes away the Network connection to Rumlog from WSJTX. As a result, my logging fails and I am not able to view folks I QSO with on WSJTX just from starting up the QSO over WSJTx or JT Bridge. Do you have a good resource to correct this issue?

Translate »
11
0
Would love your thoughts, please comment.x
()
x